Philips HX8154-70 - Manual (Page 2)

Guidance tip
ActivAtion
button
water
reservoir
power
button
NOTE: AirFloss is meant for use on the
front/outside surface of the teeth only.
step 1: CHArge
• Before first use, charge AirFloss for 24 hours.
• The indicator light flashes green until it is
fully charged. A yellow light means the device
is extremely low on charge.
• When fully charged, AirFloss should last for
two weeks of use (14 uses).
step 2: prepAre
• Attach the nozzle, and fill the reservoir with water
or mouthwash.
• The reservoir holds enough liquid for 1 to 2 uses.
step 3: prIMe
• Press the power button to turn
on AirFloss.
• Prime the device by pressing the
activation button six times or until it
sprays a fine mist.
step 4: ACtIvAte
• Proper placement is key in producing results with AirFloss.
• Place the guidance tip between the teeth at the gum line as
shown in the image above. Apply gentle pressure to direct
spray between teeth, close lips around nozzle to avoid
unwanted spray and press the activation button.
• Glide the guidance tip along the gum line until you feel it
settle between the next two teeth, and press the button
again. Repeat for all spaces between teeth, both upper
and lower.
usIng your sonICAre AIrFloss