beautypg.com

How to use, Care and cleaning – Black & Decker GR100 User Manual

Page 3

background image

How to Use

This appliance is for household use only.
BEFORE FIRST USE
• Wash griddle, warming tray and drip tray in hot, sudsy water. Rinse and dry

thoroughly.

Caution: Probe receptacle must always be completely dry before use.
• Please go to www.prodprotect.com/applica to register your warranty.
• Insert warming tray and drip tray into the rails under the front of the griddle.
TO OPERATE
. Insert probe into probe receptacle and plug the cord into a standard electrical

outlet.

. Turn the heat setting to the desired temperature. See Time and

Temperature Chart for suggestions. The signal light will come on to

indicate the unit is heating (A).

. When the signal light goes out (in about minutes), the unit is

ready.

. Signal light will cycle on and off during cooking as the unit operates to maintain

the desired temperature.

Caution: Because some countertop finishes are more affected by heat than others,

use care not to place griddle on surfaces where heat may cause a problem.
Caution: Griddle surface is hot during use.

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified

service personnel.
. Unplug, remove probe and allow the unit to COOL completely before cleaning.
. Wipe probe with a damp cloth and dry thoroughly. DO NOT IMMERSE PROBE IN

WATER.

. For easier cleaning, clear out the run-off channel by directing any remaining fat or

other liquid into the drip tray.

. Remove warming tray and drip tray. Wash the unit and both trays in hot, soapy

water. Rinse and dry thoroughly. Warming tray and drip tray are dishwasher-safe.

DO NOT IMMERSE THE UNIT IN WATER UNLESS PROBE HAS BEEN REMOVED.

. Do not use steel wool pads or other abrasive cleaners on the cooking surface as

they may damage the non-stick coating. To remove cooked-on food, use a plastic

bristle brush or nylon mesh pad.

Tips
. To avoid damaging the nonstick surface, do not use sharp utensils or cut food on

the cooking surface of the unit. Use silicone,

heat-resistant rubber or wooden utensils.

. To keep foods from sticking, you may want to add oil to the cooking surface before

each use or use a cooking spray.

Product may vary slightly from what is illustrated.

ENGLISH

1. Nonstick cooking surface
2. Probe receptacle
† 3. Probe (Part # GR100-01)
4. Handles
† 5. Warming tray (Part # GR100-02)
† 6. Drip tray (Part # GR100-03)
7. Run-off channel
Note: † indicates consumer replaceable/removable parts

o

F

200

250

300

350

400

OFF

1. Temperature settings
2. Signal light

o

F

200

250

300

350

400

OF

F

A

o

F

200

250

300

350

400

OF

F

A