Philips LCD monitor with HDMI Audio SmartTouch 224E2SB 54.6cm-21.5" E-line Full HD - Manual (Page 9)

7
2.3 Remove Base Stand and Base
Remove the Base Stand
Before you start disassembling the monitor base,
please follow the instructions below to avoid
damage or injury.
1. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen.
Physical Function
Tilt
Resolution notification
This monitor is designed for optimal performance
at its native resolution, 1920x1080@60Hz.
When the monitor is powered on at a different
resolution, an alert is displayed on screen: Use
1920x1080@60Hz for best results.
Display of the native resolution alert can be
switched off from Setup in the OSD (On Screen
Display) menu.
2. Press the locking clips to detach the base stand
away from the base column.