beautypg.com

4 using the remote control – Philips SRU5106-27 User Manual

Page 9

background image

9

EN

You can change which Volume / Mute buttons are used for a

device (e.g. use the Volume buttons of the amplifier to control the

volume of the DVD player).

3.4.1 Setting Volume / Mute control for all

devices to any single device

You can set all devices to use the Volume / Mute buttons of a

single device without needing to change to that device mode.

1

Press and hold the SETUP button until the red light indicator

turns on, then release the button.

2

Press and hold the MUTE button until the red light indicator

flashes off, then release the button.

3

Press and release the desired device Mode button (TV, DVR,

etc.) for Volume / Mute control, the red light indicator flashes

then remains lit.

4

Press and release the MUTE button.

• The red light indicator turns off.

The red light indicator will blink rapidly for three seconds

if the device you have selected has no Volume / Mute

control.

All other devices will now use the Volume / Mute buttons

of the selected device.

5

Press and release the MUTE button.

• The red light indicator turns off.

The selected device will now use its own Volume / Mute

control.

4 Using the remote control

4.1 Controlling devices requiring separate

Power On / Off buttons

Some devices (e.g. certain RCA TVs) require separate Power On

and Power Off buttons to turn the device on and off.

The equivalent button functions can be found on your Philips

remote control.

1

Turn on the device by pressing the corresponding Mode

button for more than 1 second.

2

Press and release the POWER (

y

) button to turn off the

device.

Notes

This method can be applied similarly to any device and is

available for all device modes.

• Note that this feature is not supported by all codes.

4.2 Controlling combo devices

Some combo devices (e.g. TV / DVR, TV / DVD, DVD / DVR, etc.)

have separate buttons on the original remote control to select

the part of the combo device to be controlled.

For example, if your combo device is a TV / DVD then its original

remote control might have separate TV and DVD buttons for

selection of the combo part you wish to operate. The equivalent

button functions can be found on your Philips remote control by

using the device Mode and SETUP buttons.

Using the r

emote contr

ol

English

129238_SRU5106_Short.indd 9

129238_SRU5106_Short.indd 9

05-12-2008 15:43:33

05-12-2008 15:43:33