Philips 20PF7835-37 - Manual (Page 3)

H
OOKING
U
P THE
T
ELEVISION
3
T he audio/video input jacks on the bottom panel of the TV are
for direct picture and sound connections between the TV and
a VCR (or similar device) that has audio/video output jacks.
1 Connect the VIDEO (yellow) cable to the VIDEO AV1 in
jack on the bottom of the TV.
2 Connect the AUDIO (red and white) cables to the
AUDIO (left and right) AV1 in jacks on the bottom of the
TV.
3 Connect the VIDEO (yellow) cable to the VIDEO OUT
jack on the back of the VCR or accessory device being
used.
4 Connect the AUDIO (red and white) cables to the
AUDIO (left and right) OUT jacks on the rear of the VCR
or accessory device being used.
5 Turn the VCR or accessory device and the TV ON.
6 Press the SOURCE or CH +, – buttons on the remote
control to scroll the channels. AV1 will appear in the upper
left corner on the TV screen when tuned properly.
7 With the VCR (or accessory device) ON and a prerecorded
tape (CD, DVD, etc.) inserted, press the PLAY button to
view the tape on the television.
AV 1 I NPUTS
COMP
VIDEO
INPUT 75 Ω FM ANT
DC in (24V)
AV1
in
Pr Pb Y
R L
Audio in Video in
Note: The Audio/Video cables needed for this connection are
not supplied with your TV. Please contact your dealer or Philips
at 800-531-0039 for information about purchasing the needed
cables.
H ELPFUL H INT
AUDIO IN
(RED/WHITE)
BOTTOM OF TV
VCR (or accessory device)
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
BACK OF VCR
(or Accessory device)
VIDEO IN
(YELLOW)
C omponent Video inputs provide the highest possible color and
picture resolution in the playback of digital signal source
material, such as with DVD players.
1 Connect the Component (Y, Pb, Pr) Video OUT jacks
from the DVD player (or similar device) to the
COMP(onent) VIDEO Input (Y green, Pb blue, Pr red)
jacks on the bottom of the TV. When using the Component
Video Inputs, it is best not to connect a signal to the AV1 in
Video Jack.
2 Connect the red and white AUDIO CABLES to the
Audio (left and right) output jacks on the rear of the acces-
sory device to the Audio (L and R) AV1 in Input Jacks on
the TV.
3 Turn the TV and the DVD (or digital accessory device)
ON.
4 Press the SOURCE or CH +, – buttons to scroll the
available channels until CVI appears in the upper left cor-
ner of the TV screen.
5 Insert a DVD disc into the DVD player and press the
PLAY
ᮣ button on the DVD Player.
C
OMPONENT
(CVI) I
NPUTS
S-VIDEO
OUT OUT OUT
L
R
AUDIO VIDEO COMP VIDEO
Pr
Pb
3
5
4
Y
COMP
VIDEO
INPUT 75 Ω FM ANT
DC in (24V)
AV1
in
Pr Pb Y
R L
Audio in Video in
2
1
1
2
4
TUNE TO AV1 CHANNEL
The description for the component video connectors may differ
depending on the DVD player or accessory digital source equip-
ment used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb).
Refer to your DVD or digital accessory owner’s manual for def-
initions and connection details.
H ELPFUL H INT
AUDIO CABLES
(RED/WHITE)
COMPONENT
VIDEO CABLES
(Green, Blue, Red)
BOTTOM OF TV
ACCESSORY DEVICE
EQUIPPED WITH COMPONENT
VIDEO OUTPUTS.
The CVI connection will be dominate over the AV1 in Video
Input. When a Component Video Device is connected as
described, it is best not to have a video signal connected to the
AV1 in Video Input jack.
TUNE TO CVI CHANNEL