Philips AJ7260D-37 - Manual (Page 14)

12 EN
5 Listen to radio
Note
‡
Only FM radio reception is available on this unit.
Tune to a radio station
Tip
‡
Use an FM antenna for optimal reception. Fully extend
and adjust the position of the antenna.
‡
Position the antenna as far as possible from TV, VCR or
other radiation source.
‡
[STEREO] is default setting for tuner mode.
‡
In tuner mode, you can press and hold DBB/DSC/SET
TIME to toggle between [STEREO] and [MONO], and
the unit memorizes your setting even if you turn off the
unit or turn to other sources.
1
Press SOURCE repeatedly to select FM
mode.
2
Press and hold TUNE+/TUNE- for more
than 2 seconds.
» The radio tunes to next station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
‡ To tune to a weak station, press
TUNE+/TUNE- repeatedly until you
ÀQGRSWLPDOUHFHSWLRQ
Program radio stations
Radio station preset allows you to save radio
VWDWLRQVDQGTXLFNO\WXQHWRDIDYRULWHVWDWLRQ
Note
‡
The preset list can store up to 20 stations.
‡
If the preset list is fully occupied, the screen will show
P 20.
‡
If saving a radio station to a position that has already
been occupied, the original radio station will be
replaced.
Program radio stations manually
1. Press SOURCE repeatedly to enter the FM
mode.
2. Press TUNE+/TUNE- to tune to a radio
station.
3. Press PROG/SCAN.
»
$SRVLWLRQQXPEHUÁDVKHV
4. Press OK to save current radio station to the
selected position.
Tip
‡
Press PRESET +/PRESET - to change the position to
save a radio station.
Program radio stations automatically
1
Press SOURCE repeatedly to enter the
FM mode.
2
Press and hold PROG/SCAN.
»
The screen displays [AUTO] (auto);
» The unit starts to scan for all available
radio stations automatically, and stores
them to the preset list.
3
:DLWXQWLOWKHDXWRVFDQÀQLVKHV
»
7KHÀUVWVWDWLRQLQWKHSUHVHWOLVW
broadcasts automatically.
Select a preset radio station
1
Press / to select a preset number.