Philips CRT monitor 105S61 38 cm 15" SVGA - Manual (Page 12)

1. Press the Menu Key to make the OSD window appear.
2. Press the Up or Down Key to select the desired function.
3. Press the Menu Key again to select the function that you want to adjust.
4. Press the Up or Down Key to change the settings of the current function.
5. When the OSD window is active, it shows the input signal timing. The "H" stands for the horizon
frequency and "V" for the vertical frequency.
6. To exit and save, either press the Exit Key, or leave the monitor alone for 10 seconds. If you wan
adjust any other function, repeat steps 2-4.
Adjusting the Picture
Icon Adjustment
Contrast Adjusts the contrast between the foreground and
background of the screen image.
Brightness Adjusts the background brightness of the screen
image.
Horizontal
position
Moves the screen image to the right or left.
Horizontal size Adjusts screen width.
Vertical position Moves screen image up or down.
Vertical size Adjusts screen height.
ZOOM Adjust the picture's horizontal and vertical size
simultaneously.
Pincushion Straightens the left and right vertical edges of the
display.
Trapezoid Adjusts the width of the top and bottom of the
screen.
Pin-Balance Adjust to compensate the pincushion unbalance.