Automatic power saving – Philips 107E2198 User Manual
Page 6
SCANNING
• Horizontal scanning
30 - 70 KHz
• Vertical scanning
50 - 160 Hz
VIDEO
• Video dot rate
108 MHz
• Input impedance
- Video
75 ohm
- Sync
2.2 kOhm
• Input signal levels
0.7 Vpp
• Sync input signal
Separate sync
Composite sync
• Sync polarities
Positive and negative
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates:
• at 9300 K degrees
x = 0.283 / y = 0.297
• at 6500 K degrees
x = 0.313 / y = 0.329
* These information are subject to change without notice.
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard, mouse or
other input device is detected, the monitor will automatically "wake up". The following table shows the power
consumption and signaling of this automatic power saving features:
Power Management Definition
VESA's
Mode
Video
H-sync
V-sync
Power Used
Power
Saving
(%)
LED color
ON
Active
Yes
Yes
< 73W
0 %
Green
Stand-by
Blanked
No
Yes
< 3W
96%
Yellow
107E Product Information
file:///D|/rita/LF2/LF2/LFa1/multi_manual/english/107E/PRODUCT/PRODUCT.HTM (2 of 4) [8/29/2001 2:50:09 PM]