Philips 6955XL-18 - Manual (Page 8)

14
ENGLISH ENGLISH
15
C
4 Replace the Razor Head Assembly back on
razor.
Every Two Months: Razor Head
Do not mix up the cutters and combs as the
shaving performance may be adversely affected for
several weeks before optimal shaving performance
is restored.
1 Turn razor to OFF (O) position and
disconnect from outlet.
C
2 Press the Razor Head Release Button (1)
and remove Razor Head Assembly from
the razor unit (2).
C
3 Brush the inside of the razor housing.
4 Turn Razor Head Assembly over so that
underside is exposed.
C
5 Turn wheel of frame counterclockwise.
6 Remove the frame and brush clean.
15
Replace razor head assembly. Cleaning
Once a week: Razor
◗ Always clean your razor after each use.
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head assembly
while motor is on.
◗ Do not apply pressure to shaving head combs.
Do not touch razor heads with hard objects
as this may dent or damage precision-made
slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Do not use abrasives, scourers or aggressive
liquids such as gasoline or acetone to clean
the razor.
C
1 Clean the top of the razor with the
supplied brush.
C
2 Press the Razor Head Release Button (1)
and remove Razor Head Assembly from
the razor unit (2).
C
3 Brush out hairs from the inside of Razor
Head Assembly and hair chamber.