Philips PicoPix Pocket projector PPX2495 100 lumens with MP4 player - Manual (Page 13)

Connect to the Playback Device 13
Connecting Using Audio/
Video (CVBS) Adaptor
Cable
Use the projector's audio/video adaptor cable (A/V
cable) to connect camcorders, DVD players or digital
cameras. The jacks for these devices are yellow (video),
red (audio right) and white (audio left).
1 Connect the supplied A/V cable to the projector's
mini-HDMI input.
2 Connect the video device's audio/video jacks to the
A/V cable using a conventional composite video
(RCA) cable.
3 Select Menu > Source and switch to AV.
Connecting to Mobile Multimedia Devices
Some video devices (e.g.: pocket multimedia players, ...)
require specific connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
Connecting the Headphones
1 Before connecting the headphones, turn down the
volume on the device.
2 Connect the headphones to the projector's head-
phone slot. The device speakers deactivate automat-
ically when the headphones are connected.
3 After connecting the headphones, increase the vol-
ume to a comfortable level.
Note
Switching to the Multimedia Device Sig-
nal output
See the multimedia device instruction manual
to find out how to switch the signal output to
this jack.
DANGER!
Danger of Hearing Damage
Do not use the device over a longer time at
high volume—especially when using head-
phones. This could lead to the risks of hearing
damage. Before connecting the headphones,
turn down the volume on the device. After
connecting the headphones, increase the vol-
ume to a comfortable level.