Philips HTS6515D-37B - Manual (Page 42)

42 EN
Tips
See chapter ‘Get Started - Start Ambisound setup’
for detailed information. •
[ HDMI Audio ]
When you connect this unit and TV with
HDMI cable, select the audio output
setting for this connection.
[ On ] – the sound is output through
both your TV and this speaker system.
If the audio format on the disc is not
supported, it will be downmix to two-
channel sound (linear-PCM).
[ Off ] – disable audio output from
your TV. The sound is only output
through this speaker system.
[ Night Mode ]
Make loud sound level softer and soft
sound level louder so that you can watch
the DVD movies at a low volume, without
disturbing others.
[ On ] – for quiet viewing at night
(DVDs only).
[ Off ] – enjoy surround sound with a
full dynamic range.
•
•
•
•
Video setup
1
Press OPTIONS.
[ General Setup ] menu is displayed.
2
Press V to select [ Video Setup ], then
p
ress B.
3
Select an option, then press OK.
Video Setup
HDMI Setup
Closed Caption
TV Display
TV Type
Picture Settings
Progressive
See the explanations of the above
options in the following pages.
4
Select a setting, then press OK.
To return to the previous menu, press
BACK.
To exit the menu, press OPTIONS.
•
•
•