Philips Bluetooth Headset SHB1300 - Manual (Page 9)

16 17
Problem solving & support
To adjust the neckband in size:
Open the clip (S4)
Move the slider (S5) up or downward on the earplug
cable
Fix your preferred length with the clip (S4)
For optimal wearing comfort choose one of the three
included rubber ear caps that best fits your ear and place
it on the earplug.
Specifications
Problem Possible cause Solution
Bluetooth headset does
not switch on.
Battery is very low. Charge the battery.
No connection to mobile
phone.
Bluetooth disabled. Enable Bluetooth on your
mobile phone and turn the
HS on.
Mobile phone cannot find
headset
Headset may not be in
pairing mode. (HS stays in
pairing mode for 4 min.)
Put HS in pairing mode as
described above.
Pairings may have been
reset.
Start the pairing process as
describe above.
Redialing does not work. Your mobile phone may
not support this feature.
Voice dialing does not
work.
Your mobile phone may not
support this feature.
*Please visit www.philips.com/support for additional support.
Rechargeable Lithium-Ion battery
Bluetooth 1.2 compliant, HSP, HFP
Range: Up to 33 feet / 10 meters
Typical standby time: 200 hours
Typical talk time: 7 hours
Typical charging time: 3 hours
Design and specifications are subject to change without notice. Talk time and stand-by
time may vary.
The headset is not charging
or charging very slowly
The USB port provides no, or
too little power.
Your USB port should provide
500mA. Try another USB port
at the back of your PC or on a
powered USB hub.
Certifications, approvals, statements
Trademarks
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by Koninklijke Philips Electronics N.V. is under license. Other trademarks and
trade names are those of their respective owners.