Fm radio – Philips WAS700-37 User Manual
Page 28
28
English
Tuning to radio stations
1
Check the set is switched on or to standby
(See Basic functions, Switching on/to
standby and selecting functions,
Switching to Eco power/ on
)
2
Press SOURCE once or more to select Radio
(on the remote control, press TUNER/AUX
once or more)
➜
Playback screen appears. Display shows:
Radio
, radio station frequency and If
programmed, a preset number.
3
Press and hold 3 or 4 until the frequency
in the display starts running.
➜
The radio automatically tunes to a station of
sufficient reception. Display shows searching
during automatic tuning
➜
If a station is received in stereo,
is
shown.
➜
When you are receiving an RDS station,
is shown.
4
Repeat step 3 if necessary until you find the
desired radio station.
●
To tune to a weak station, press 3 or 4
briefly and repeatedly until optimal reception is
found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Autostore: automatic programming
Autostore automatically starts programming
radio stations from preset 1. Available stations
are programmed in the order of radio
frequencies: RDS stations followed by FM
stations. Maximum 10 RDS stations will be
stored (from Preset 1 to Preset 10).
●
To select Autostore radio,
a. Press MENU.
b. Use the navigation controls 3 or 4 and 2 to
select
➜
Display shows: Autostore Please wait...
➜
After all stations are stored, the first autostore
preset station will then automatically play.
Manual programming
1
Tune to your desired radio station (see Tuning
to radio stations
)
2
On the remote control, press Program to store
the station.
➜
The station is stored in the 1st vacant preset
position. Display shows its preset number.
3
Repeat steps 1-2 to store other stations.
Helpful hints:
– If you store more than 40 stations, the new
station will replace the 1st preset station.
To listen to a preset station
1
Press 1 to enter the list of presets
2
Use the navigation controls 3 or 4 and 2 to
select the desired station
FM radio
P001-P033_WAS700_Eng
9/28/2005, 14:59
28