Specifications, Highlights – Philips Noise Canceling Headphone SBCHN110 User Manual
Page 2
Issue date 2014-03-14
Version: 4.0.6
12 NC: 9082 100 03262
UPC: 0 26616 00142 2
© 2014 Koninklijke Philips N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.
Specifications
SBCHN110/37
Noise Canceling Headphone
Highlights
Airplane adaptor included
Use your own headphones to listen to in-flight
entertainment. The adaptor simply converts the
standard double-mono jacks to a stereo headphone
jack.
Audio jack adaptor included
With this adaptor, you can use your headphone on
equipment with either 3.5 or 6.35 mm jacks, giving
you a wider choice of audio devices.
Battery included
No need to buy batteries to get started. Just drop
the batteries in and go!
Carrying pouch included
Look after your headphone and stop the cable
getting tangled by storing it in this handy soft pouch.
Electronics integrated
All the active electronics are integrated into the
headphone so there is no extra box to carry around.
Foldable headband
The headphone can fold down to a small size for
convenient storage when not in use.
Active Noise reduction
This smart noise reduction technology enhances the
pleasure of listening to lower volume levels in noisy
environments. It's particularly good at removing low-
frequencies like jet engine noise, so you can enjoy
soft music on flights, and in trains and similar places
without hearing a distracting buzz in the background.
The technology actual creates an equal but opposite
waveform to the noise that that by a process of
subtraction, effectively cancels out the unwanted
noise.
Excellent sound quality
Acoustically-tuned design and high-quality drivers
ensure best-in-class audio performance.
Neodymium magnet
Neodynium is the best material for producing a
strong magnetic field for greater sensitivity in a voice
coil, better bass response and higher overall sound
quality.
Comfort ear cushions
The special shape and luxurious materials used for
the ear cushions of these Philips headphones ensure
a perfect fit for maximum comfort. They prevent
audio leakage and enhance bass performance too.
The ear cushions are shaped in such a way that they
perfectly align with the area around a person's ear.
Full size design
Full-size earshells of these Philips headphones not
only cover your whole ear for better sound quality,
but also provide space for a larger, higher
performance driver.
Sound
• Active noise attenuation: 50 - 1500 Hz, >10 dB at
300 Hz
• Acoustic system: open
• Magnet type: Neodymium
• Voice coil: copper
• Diaphragm: Mylar dome
• Frequency response: 20 - 20 000 Hz
• Impedance: 25 ohm
• Maximum power input: 500 mW
• Sensitivity: 102 dB
• Speaker diameter: 40 mm
• Type: Dynamic
• Noise canceling effect: ~10 dB at 300 Hz
Connectivity
• Cable length: 1.5 m
• Connector: 3.5 mm
• Finishing of connector: chrome-plated
• Type of cable: OFC
Accessories
• Adaptor plug: 3.5 - 6.3, 2 x 3.5 mm
• Battery: 1.5 V R03/AAA
• Included: protective pouch
Packaging dimensions
• Packaging dimensions (W x H x D):
8.0 x 8.9 x 3.6 inch
• Nett weight: 0.335 lb
• Gross weight: 0.968 lb
• Tare weight: 0.633 lb
• Number of products included: 1
• Packaging type: Carton
• UPC: 0 26616 00142 2
Outer Carton
• Outer carton (L x W x H): 23.8 x 18.1 x 19.3 inch
• Nett weight: 8.042 lb
• Gross weight: 34.445 lb
• Tare weight: 26.403 lb
• GTIN: 2 00 26616 00142 6
• Number of consumer packagings: 24
Inner Carton
• Inner carton (L x W x H): 8.7 x 7.7 x 9.1 inch
• Nett weight: 1.938 lb
• Gross weight: 2.870 lb
• Tare weight: 0.933 lb
• GTIN: 1 00 26616 00142 9
• Number of consumer packagings: 2
•