Philips DVD781CH99 - Manual (Page 9)

Hookups (cont’d) 9
Connecting the DVD Player to a TV only (no stereo or amplifier)
TV has audio (red and white) and S-Video In jacks
● For better picture quality, use an optional S-Video cable to connect the S-VIDEO OUT jack on the DVD
Player to the S-VIDEO IN jack on your TV. You will not use the yellow VIDEO OUT jack on the DVD
Player, and you will not need the yellow video cable.
● Set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages 38-39. If you play a DVD
when the settings are wrong, the sound will be distorted or you may damage the speakers.
DIGITAL AUDIO OUT
PCM / BITSTREAM AUDIO OUT VIDEO OUT S-VIDEO OUT
COAXIAL OPTICAL
COMPONENT
VIDEO OUT
R L
1
2
Y
Cb
Cr
VIDEO L/MONO AUDIO R in
1
S-VIDEO IN
LEFT AUDIO IN
RIGHT AUDIO IN
1
Connect the red and white audio cables to the red and white AUDIO OUT jacks (either 1 or 2)
on the DVD Player and to the red and white AUDIO IN jacks on the TV, matching the cable col-
ors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to connect the DVD
Player’s white AUDIO OUT jack to the TV’s AUDIO IN jack. You will not use the red audio cable.
2
Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack on the DVD Player and to
the S-VIDEO IN jack on the TV.
3
Connect the TV’s power cord to a power outlet.
Turn on the TV and set it to the S-VIDEO IN channel. This channel usually is located near channel 00.
See your TV owner’s manual for details.
4
Connect the DVD Player’s power cord to a power outlet.
Press the POWER button to turn on the DVD Player. “HELLO” will appear briefly on the DVD
Player’s display panel. You should see the DVD logo on the TV screen briefly. If you do not, check your con-
nections and make sure the TV is on the correct S-Video In channel. If there is no disc in the DVD player, “no
DISC” will appear on the display panel.
1
2
Back of TV
(example only)
DVD Player