Philips 27RF50S99 User Manual

Page 39

LOSSARY TO

ELEVISION

ERMS

Auto Programming • The procedure of adding or deleting
channel numbers into the Television’s memory circuits. In this
way the Television “remembers’’ only the locally available or
desired channel numbers and skips over any unwanted channel
numbers.

Coaxial Cable • A single solid antenna wire normally matched
with a metal plug (F-type) end connector that screws (or pushes)
directly onto a 75 Ohm input found on the Television or VCR.

Closed Caption • Broadcast standard which allows you to read
the voice content of television programs on the TV screen.
Designed to help the hearing impaired this feature uses on-
screen "text boxes" to show dialogue and conversations while
the TV program is in progress.

Side Audio/Video Inputs • Located on the side of the TV these
connectors (phono type plug) are used for the input of audio
and video signals. Designed for easy use with VCRs or cameras.

Menu • An on-screen listing of feature controls shown on the
Television screen that are made available for user adjustments.

On-screen Displays (OSD) • Refers to the wording or messages
generated by the television (or VCR) to help the user with spe-
cific feature controls (color adjustment, programming, etc.).

Quadra Surf • The feature that allows the programming of four
separate Surf lists holding up to 10 channels each.

Remote Sensor Window • A window or opening found on the
Television control panel through which infrared remote control
command signals are received.

Surf • The action of scanning specific channel in a limited
channel list.

Status/Exit • Allows the user to quickly confirm what channel
number is currently being viewed. Status can also be used to
clear the Television of on screen displays or information (rather
than waiting for the displays to “time out” or automatically dis-
appear from the screen).

Twin Lead Wire • The more commonly used name for the two
strand 300 Ohm antenna wire used with many indoor and out-
door antenna systems. In many cases this type of antenna wire
requires an additional adapter (or balun) in order to connect to
the 75 Ohm Input terminals designed into the more recent
Televisions and VCRs.

Tuner Mode • Feature control settings made by the TV.
Designed for first time set up and use. Settings for signal con-
nections (antenna or cable TV), plus channel program memory
are held in the TV's memory (even if the set is unplugged and
moved to a new location.)