Philips 17PF8946A-37 - Manual (Page 40)

40
PIP CC
PROG. LIST CLOCK
A/CH
TV/VCR SLEEP SOURCE FORMAT
AUTO ACTIVE AUTO
SOUND CONTROL PICTURE
MENU SOUND
SURR.
VOL CH
MUTE
PC TV HD
RADIO
1 2 3
4 5 6
7 8 9
0
STATUS/EXIT SURF
TV
DVD
ACC
POSITION
2
1
3
4
5
N ow that you have looked up the three-
digit Remote Code Number for your
brand of device, you are ready to follow the
four simple steps below.
Please read through steps 1-4 before begin-
ning.
1 Place the TV/DVD/ACC Mode
Switch in the proper position.
2 Press the • RECORD button on the
remote control and release.
3 Press the AUTO SOUND button on
the remote within 30 seconds, then
release.
4 Enter the FOUR-DIGIT REMOTE
CODE NUMBER (page 42-44) for
your desired device. The remote is now
ready to send commands to the unit.
5 Point the remote at the Device. Press
the POWER button on the remote to
turn the unit ON. If this works you are
finished. If it does not work the first
time, repeat the steps using a different
remote code number.
R
EMOTE
C
ONTROL
U
SE WITH
A
CCESSORY
D
EVICES
- C
ODE
E
NTRY
M
ETHOD
After a second try and the remote does not
operate your device, see if there is another
four-digit code number (pages 42-44) listed
for your device and repeat the steps above
using the new number.
If after repeated attempts the code number
method does not work you device, try the
SEARCH METHOD on the next page.
NOTE: Setting up the remote is for use with
external accessory devices only and not for use
with other television brands.
H ELPFUL H INT
Cable Converter
Satellite Receiver
or DBS, DVD
VCR