Philips Brilliance LCD monitor with LED 248C3LSB Moda 23.6" - 59.9 cm Full HD display with SmartImage - Manual (Page 17)

15
3. Image Optimization
To enable Theft Deterrence, clicking Enable Theft
Deterrence Mode button brings up the following
screen:
•
User can enter PIN between 4 and 9 digits
numbers only.
• After entering PIN, Accept button takes user
to the pop-up dialog box on the following
page.
• Minimum minutes set to 5. Slider set to 5 by
default.
• Does not require the display be attached to
a different host to go into Theft Deterrence
mode.
After creating PIN, the Theft Deterrence pane will
indicate Theft Deterrence Enabled and provide
PIN Options button:
•
Theft Deterrence Enabled is displayed.
• Disable Theft Deterrence Mode opens pane
screen on next page.
• PIN Options button only available after user
creates PIN, button opens secure PIN web
site.
Options>Preferences - Will only be active
when selecting Preferences from the drop-down
Options menu. On a non-supported display
capable of DDC/CI, only the Help and Options
tabs are available.
• Displays current preference settings.
• A checked box enables the feature. The check
box is a toggle.
• Enable Context Menu on desktop is checked
(On) by default. Enable Context menu
displays SmartControl Premium selections for
Select Preset and Tune Display in the desktop
right-click context menu. Disabled removes
SmartControl Premium from the right click
context menu.
• Enable Task Tray icon is checked (On) by
default. Enable context menu shows the task
tray menu for SmartControl Premium. A right
click on the task tray icon displays the menu
options for Help, Technical Support. Check for
Upgrade, About, and Exit. When Enable task
tray menu is disabled, the task tray icon will
only display EXIT.
• Run at Startup is checked (On) by default.
When disabled, SmartControl Premium will
not launch at start or be in the task tray. The
only way to launch SmartControl Premium is
either from the desktop short cut or from the
program file. Any preset set to run at startup
will not load when this box is unchecked
(Disabled).
• Enable transparency mode (Windows 7, Vista,
XP). Default is 0% Opaque.