Philips SHC8525-05 - Manual (Page 9)

Wrong battery orientation Reposition the batteries according to
the engraved polarity symbol.
No power supply to transmitter Make sure the docking station is
connected to the local mains power
supply through an adapter and follow
step 5 to 7.
Battery power running low Follow steps 5 to 7 to recharge the
system.
Audio source not connected Make sure the audio output of your
audio source is connected to the
3.5 mm STEREO INPUT JACK of
your transmitter. Follow step 9 to 12.
Audio source is off Turn on your audio source.
Volume level set too low Adjust the volume level of your
audio source or the headphone.
Hearing Safety: Continuous use at a
high volume may permanently damage
your hearing.
Audio output level low In case of audio sources with
adjustable output level, adjust the
output level to a higher and
non-distorted level. IMPORTANT:
In case of certain TVs, the headphone
jack output level can only be adjusted
after accessing the TV on-screen menu.
Headphone not tuned to Select 1 of the 3 frequency options
the transmitter provided in the headphone (i.e. the
one selected at the transmitter) by
adjusting the MANUAL TUNING
SWITCH, then the headphone will
quickly tune to the transmitter.
Interference from other 1) Alter the transmitter’s frequency
radio sources channel. Select 1 of the 3 options for
best reception.We advise you to
select channel 1 as the first option.
Next adjust the headphone’s tuning
channel as described above.
2) Move transmitter or headphone
elsewhere
Receiver too far away from Move closer for reception
transmitter
Transmitter other than
Make use of the SHC8525
SHC8525 is used transmitter provided. Some
transmitters already built into other
equipment may not be compatible
with the SHC8525 headphone
because of the advanced
technologies used.
ENGLISH 9