Turn on, Set time and date, Switch to standby mode – Philips AJ5300D-37 User Manual

Page 17

Turn on

Press .

The clock radio switches to the last selected source.

Switch to standby mode

Press to switch the clock radio to standby mode.

The clock (if set) is displayed.

Set time and date

1 In standby mode, press and hold TIME SET on the back of your

clock radio for more than two seconds.

[12H] or [24H] begins to blink.

2 Press

repeatedly to select 12/24 hour format.

3 Press TIME SET to confirm.

The hour digits begin to blink.

4 Repeat steps 2-3 to set hour and minute.

Note

•

If clock is not manually set, when iPod/iPhone is connected, the unit

synchronizes time from the iPod/iPhone automatically.

Tip

•

The accuracy of the transmitted time depends on the docked iPod/

iPhone that transmits the time signal.