Philips MC138-37 - Manual (Page 15)

15
English
MC138/17 English issue 1
CD Operation
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The play
modes can also be combined with
PROGRAMME.
SHUFFLE ......... tracks of the entire disc/
programme are played in
random order
SHUFFLE and REPEAT ALL…to repeat the
entire disc/ programme
continuously in random order
REPEAT ALL ... repeats the entire disc/
programme
REPEAT ............ plays the current track
continuously
1 To select your play mode, press the SHUFFLE
or REPEAT button before or during playback
until the display shows the desired function.
2 Press
2; to start playback if in the STOP
position.
➜ If you have selected SHUFFLE, playback starts
automatically.
3 To return to normal playback, press the
respective
SHUFFLE or REPEAT button until
the various SHUFFLE/ REPEAT modes are no
longer displayed.
● You can also press 9 to cancel your play mode.
Programming track numbers
Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 tracks can be stored in the memory.
1
Press PROGRAM (PROG on the remote
control) to enter the programming mode.
➜ Prog is shown and
PROGRAM flashes.
2 Use the
¡1 or 2™ (¡ or ™ on remote control)
to select your desired track number.
3
Press PROGRAM (PROG on the remote
control) to confirm the track number to be
stored.
➜ Next program number P-0Xis displayed.
4 Repeat steps 2-3 to select and store all desired
tracks.
➜FULLis displayed if you attempt to
programme more than 20 tracks.
5 To start playback of your disc programme, press
2;.
Note:
– If you wish, you can add further tracks to your
current program. Make sure you are in the STOP
position, and that you have not exceeded 20
tracks.
Reviewing the programme
In STOP mode, press and hold down
PROGRAM (PROG on the remote control)
for a while until the display shows all your stored
track numbers in sequence.
Erasing the programme
You can erase the programme by:
● pressing 9 once in the STOP mode;
● pressing 9 twice during playback;
● opening the CD compartment;
➜
PROGRAM disappears from the display.