Philips HD camcorder CAM200WH - Manual (Page 10)

10 EN
Charge the built-in battery
1
Open the protective cover at the bottom
of the camcorder.
2
Connect the camcorder to a PC through
the supplied USB cable.
» The charge status is shown on the
touch screen of the camcorder.
3
When the battery is full, disconnect the
USB cable and close the protective cover.
Tip
‡ 7KH FDPFRUGHU LV IXOO\ FKDUJHG IRU ÀUVWWLPH XVH
‡ It takes about 3 hours to fully charge the built-in
battery through a PC.
You can also charge the camcorder through a
USB adaptor (not supplied) connected to mains
power. The charge time is about 2 hours.