Philips 55PFL5505D-F7 - Manual (Page 11)

10
Connecting the AC power cord
Warning
• Verify that your power voltage corresponds with the voltage printed at the back of the
TV. Do not insert the AC power cord if the voltage is different.
1
Locate the power connector at the back of the TV. The location of
the power connector varies according to TV model.
2
Insert the AC power cord fully into the power connector.
3
Connect the AC power cord plug to the power outlet. Ensure that
the cord is tightly secured at both ends.
AC IN
PC-IN RGB SERVICE ONLY
Disconnect the TV from the power outlet
Caution
• Pull the AC power cord by the plug; do not pull on the AC power cord.
1
Unplug the AC power cord from the power outlet.
2
Unplug the AC power cord from the power connector at the back
of the TV.
Managing cables
Route your antenna cable and all other cables through the cable holder
at the back of the TV. The holder helps keep your cables tidy and easily
manageable.
1
Attach the cable holder as illustrated below.
Keep the cable through this holder to avoid tangle them.
EN
LC8(P&F)_master draft_EN_v1.indd 10 LC8(P&F)_master draft_EN_v1.indd 10 2010/01/18 17:35:54 2010/01/18 17:35:54