Bissell AUTO-MATE 47R5 - Manual (Page 6)

6. Reconnect filter and screen by aligning
rectangular tab on filter with insert on
screen. Press together to ensure assembly
is secure.
7. See page 5 to reattach dirt container.
notE: dirt container and screen may
be rinsed with cold water. Ensure
both are dry before reinserting.
do not wash or rinse pleated filter.
Storage/cord wrap system
A wrap is always attached to the cord
for quick and easy storage.
1. To store the unit, turn hand vacuum OFF (O).
2. Unplug hand vacuum from electrical outlet.
3. Bundle cord, using wrap that is located
on cord, to store.
nozzle and tools Maintenance
Keep nozzle and tools clean and free
of debris by wiping nozzle and tools
clean with damp cloth
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
M
aintenance and care
6
T
roubleshooting
5. 5a.
6.
Insert Tab
Hand vacuum won’t turn on
Possible causes Remedies
1. Power cord not plugged in 1. Check electrical plug
2. Blown fuse/tripped breaker in home 2. Check/replace fuse or reset breaker
Hand Vacuum won’t pick up or low suction
Possible causes Remedies
1. Dirt container not installed properly 1. Check assembly of dirt container making
sure it is securely in place
2. Dirt container is full 2. Empty dirt container and reattach
3. Filter or screen is dirty 3. See instructions above. Replace filter if needed
4. Nozzle or hose is clogged with debris 4. Remove hose and tool and remove debris
other maintenance or service not included in the manual should be
performed by an authorized service representative.
thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be
of service. contact us directly at 1-800-237-7691.