Philips Blu-ray Disc-Player - Manual (Page 5)

3 Set up
1. Turn the TV on.
2. Set the TV to the correct external input.
3. Press the STANDBY-ON button.
> The STANDBY-ON light comes on as blue.
4. Open the user access panel.
5. If the TV connection is HDMI (refer to 1A), press the VIDEO OUTPUT
SELECTION button until the HDMI light comes on.
> The video signal of the Blu-ray Disc player shows.
6. If the TV connection is component video (refer to 1B), press the VIDEO OUTPUT
SELECTION button until the COMPONENT light comes on.
> The video signal of the Blu-ray Disc player shows.
7. Follow the on-screen instructions.
BDP9000_QSG_EN.qxd 9/8/06 12:23 PM Pagina 7