Philips 245P2EB-27 - Manual (Page 33)

31
4.2 Automatic PowerSaving
If you have VESA DPM compliance display card
or software installed in your PC, the monitor can
automatically reduce its power consumption when
not in use. If an input from a keyboard, mouse or
other input device is detected, the monitor will
'wake up' automatically. The following table shows
the power consumption and signaling of this
automatic power saving feature:
4.1 Resolution & Preset Modes
Maximum Resolution
For 245P2
1920 x 1200 at 60 Hz (analog input)
1920 x 1200 at 60 Hz (digital input)
Recommended Resolution
For 245P2
1920 x 1200 at 60 Hz (digital input)
H. freq (kHz) Resolution V. freq (Hz)
31.469 720x400 70.087
31.469 640x480 59.940
35.000 640x480 67.000
37.500 640x480 75.000
35.156 800x600 56.250
37.879 800x600 60.317
46.875 800x600 75.000
48.363 1024x768 60.004
60.023 1024x768 75.029
63.981 1280x1024 60.020
79.976 1280x1024 75.025
65.290 1680x1050 60.000
64.674 1680x1050 60.000
74.560 1920x1200 60.000
74.520 1920x1200 60.000
Power Management Definition
VESA
Mode
Video H-sync V-sync Power Used LED color
Active ON Yes Yes 47W (typ.)
55W (max.)
(with audio
and USB x 1)
White
Sleep (typ.) OFF No No 0.1W White
(Blinking)
Switch Off OFF - - OFF OFF
Note
This data is subject to change without notice.
The following setup is used to measure power
consumption on this monitor.
Native resolution: 1920x1200.
Contrast: 50%
Brightness: 300 nits
Color temperature: 6500k with full white pattern
Audio and USB Inactive (Off)