Philips Norelco Shaver 4100 Series 4000 wet & dry electric shaver AT810-41 DualPrecision heads Flex & Float system 50 min shaving 1 hour charge AquaTech wet & dry technology with Aquatec - Wet or Dry shaving and Pop-up trimmer - Manual (Page 18)

ENGLISH
Cleaning
w
Always clean your razor after each use.
w
Always switch razor OFF, unplug and remove
power cord before cleaning.
w
Never clean, remove or replace head
assembly while motor is on.
w
Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
w
Do not use razor if combs are damaged or
broken. Facial injury may occur.
w
Do not use compressed air, abrasives,
scourers or aggressive liquids such as gasoline
or acetone to clean the razor.
Cleaning the Shaving Unit
The razor heads may be quickly cleaned after
each use by rinsing with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
w
Regular cleaning guarantees better shaving
results.
w
Do not immerse razor in water.
w
While rinsing razor heads, water may drip
out of the base of razor. This is a normal
occurrence.
1 Always turn razor OFF, unplug from outlet
and remove power cord from razor.
18