Specifications, Highlights – Philips SHH8808-00 User Manual
Page 2
Issue date 2013-01-31
Version: 3.0.4
12 NC: 8670 000 47333
EAN: 87 12581 45016 8
© 2013 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Specifications
SHH8808/00
In-Ear Headphones
Highlights
Sound stage enhancer design
The sound stage enhancer design modifies the
conventional headphone structure to complement
the powerful microdrivers in producing a wider
sound stage effect.
Angled acoustic design
Derived from a thorough understanding of the
anatomy of a human ear canal, the Angled Acoustic
design adjusts the angle of the speaker tube and ear
bud to individual ear canal shapes. Besides delivering
sound directly to your ears, it also creates a perfect
seal from ambient noise that enables you to listen to
your music at lower volume levels.
Deliver wide frequency range
Specifically designed microdrivers produce extra
deep bass and wider dynamic range to unleash the
full potential of your Ipod nano.
Philips iLab acoustic tuning
Meticulously tuned by Philips' state-of-the-art iLab
expertise, the wide band sound stage from these
headphones make for an unforgettable listening
experience. The underlying iLab technology ensures
greater output from lower frequencies and helps to
create a more balanced and accurate sound than that
offered by traditional earphones.
Ear fitting design
The design superiority of a slight 15-degree tilt in the
Angled Acoustic model based on the anatomy of the
human ear achieves a natural fit and supreme
comfort.
Mic friendly headphones
The cable length of these headphones is designed to
optimize sound pick up from the microphone of your
headset connector. It also optimizes overall cable
length of these headphones combined with a headset
connector. Headset connectors allow the use of
standard headphones (without a mic and with a
standard 3.5mm headphones plug) with a mobile
phone. They often come with mobile phones but can
also be purchased seperatley. For most mobile
phone brands Philips SHH1XXX headset connectors
are available. It also optimizes overall cable length to
the mobile phone.
3-size ultra-soft silicon cap
Available in three different sizes (small, medium and
large), the interchangeable ear caps ensure a
personalized fit to each individual user. They are also
made from ultra-soft silicon to provide the utmost
comfort for prolonged listening.
Split cable
This standard cable has a 3.5mm socket on one end
and a 3.5mm plug on the other for extending your
freedom of movement with headphones.
Sound
• Magnet type: Neodymium
• Frequency response: 6 Hz - 23 500 Hz
• Sensitivity: 99 dB
• Maximum power input: 50 mW
• Impedance: 16 ohm at 1kHz
• Speaker diameter: 13.5 mm
• Type: Dynamic
Connectivity
• Cable length: 0.30 m + 1 m
• Connector: 3.5mm stereo
• Finishing of connector: Gold plated
Accessories
• Extension cable: 1m
• Storage pouch
Inner Carton
• EAN: 87 12581 45018 2
• Number of consumer packagings: 3
• Inner carton (L x W x H): 11.1 x 10.2 x 19.2 cm
• Gross weight: 0.2813 kg
• Nett weight: 0.027 kg
• Tare weight: 0.2543 kg
Outer Carton
• EAN: 87 12581 45017 5
• Number of consumer packagings: 24
• Outer carton (L x W x H): 23.9 x 22.1 x 41.2 cm
• Gross weight: 2.5823 kg
• Nett weight: 0.216 kg
• Tare weight: 2.3663 kg
Packaging dimensions
• EAN: 87 12581 45016 8
• Number of products included: 1
• Packaging dimensions (W x H x D):
10.2 x 18 x 3 cm
• Gross weight: 0.0642 kg
• Nett weight: 0.009 kg
• Tare weight: 0.0552 kg
• Packaging type: Blister
•