Safety & troubleshooting, Safety and troubleshooting information – Philips 150S4FG-74 User Manual
Page 2
Safety & Troubleshooting
Safety and Troubleshooting Information
Safety Precautions and Maintenance
•
•
•
Safety precautions and maintenance
WARNING: Use of controls, adjustments or procedures other than those
specified in this documentation may result in exposure to shock, electrical
hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
●
Unplug the monitor if you are not going to use it for an extensive period of time.
●
Unplug the monitor if you need to clean it with a slightly damp cloth. The screen many be wiped with
a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids.
●
Consult a service technician if the monitor does not operate normally when you have followed the
instructions in this manual.
●
The casing cover should be opened only by qualified service personnel.
●
Keep the monitor out of direct sunlight and away from stoves or any other heat source.
●
Remove any object that could fall into the vents or prevent proper cooling of the monitor’s
electronics.
●
Do not block the ventilation holes on the cabinet.
●
Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.
●
When positioning the monitor make sure the power plug and outlet are easily accessible.
●
If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds before
attaching the power cable or DC power cord for normal operation.
●
To avoid the risk of shock or permanent damage to the set do not expose the monitor to rain or
excessive moisture.
●
When positioning the monitor, make sure the power plug and outlet are easily accessible.
●
IMPORTANT: Always activate a screen saver program during your application. If a still image in high
contrast remains on the screen for an extended period of time, it may leave an 'after-image' or 'ghost
image' on front of the screen. This is a well-known phenomenon that is caused by the shortcomings
inherent in LCD technology. In most cases the after-image will disappear gradually over a period of
time after the power has been switched off. Be aware that the after-image symptom cannot be
repaired and is not covered under warranty.
Consult a service technician if the monitor does not operate normally when the operating instructions given
in this manual have been followed.
file:///D|/B/english/150s4fgbs/safety/safety.htm (1 of 2) [8/27/03 11:39:11 AM]