Philips 42PFL7422D-37 - Manual (Page 19)

_________________________
7.3 Store TV channels
After language is set correctly, you can now search for and store the TV
channels.
‡ Select Channel installation and press the cursor right.
® Select Autoprogram.
Ò Press the cursor right.
† Press the
OK button.
º Select Cable or Antenna in the Installation mode.
> When Antenna is selected, the TV will detect antenna signals and
will search for antenna TV (NTSC and ATSC) channels available in
your local area.
> When Cable is selected, the TV will detect cable company supplied
signals and will search for cable TV (NTSC,ATSC, QAM
modulated) channels available in your area.
ç Make sure that registration with your cable TV provider and
connection of equipment are completed.
◊Press the green corresponding color button on the remote control
for ‘Next’.
ç All channels must be unlocked in order to autoprogram. If requested,
enter your PIN code to unlock all channels. See Chapter 6 Adjust
features menu settings.
‹ Press the green corresponding color button on the remote control
for “Start” to start autoprogramming.
>
The menu screen disappears and the progress of
autoprogramming is displayed.
The progress bar indicates the number of analog and digital TV
channels found.
> When Autoprogramming is complete, a message appears
confirming the completion and the TV switches to the first
installed TV channel.
≈Press the red color button to finish.
ç Don’t forget !
- When interrupted, the updated channel information is retained as well
as the not yet updated old channel information.
- Background autoprogramming occurs only when the TV is turned on.
- Channel information of an ATSC channel is updated only for the ATSC
channel currently tuned.
- Once you have searched for as well the available Antenna as well as the
Cable TV channels, they are stored in the memory.
Channel tuning
ç After the installation of the TV channels has been done, always make
a selection in the Installation menu, Installation mode between Antenna
or Cable whether you want to watch Antenna TV channels or Cable TV
channels.
) If you make use of a signal splitter do not forget to put the switch in
the corresponding position.
Available channels:
- Cable (analog NTSC or digital QAM): max. from 1 to 135
- Terrestrial (analog NTSC or digital ATSC): max. from 2 to 69
If a tuned channel is not yet in the master channel map, the TV will
attempt to tune the channel and it will be added to the map.
If the channel is not acquired, a message will appear that the channel is
not available.
When you tune an audio-only digital subchannel, a display appears with
the message Audio only.
ç Subchannel selections
The new standards employed with digital broadcasting make it possible
to receive multiple program channels under a single major channel
number which can be selected by pressing the digit channel number
entry.
ç Digital Channel selection delay
Due to the tuning complexity of subchannel digital programming, the
time to select and view a digital channel may take slightly longer than
what the viewer is normally accustomed to (as compared to analog
channel programs).
Digital channel broadcasts contain program and system data information
that must be processed before the channel selection can be displayed.
_________________________
7.3.1 Installation update
This allows you to automatically tune to and update all available
channels, without altering the sorting of existing channels.
ç - New channels found will not be added to any favorite list.
- Already installed channels will not be renumbered.
_______________________
7.3.2 Weak channel installation
This allows you to manually tune weak ATSC channels in order to adjust
the antenna and thus optimize signal quality for that channel.This only
available for TV channels installed via an antenna connection.
‡ Select a channel in the displayed list of TV channels (in the antenna
mode).
® The signal strength is displayed and updated continuously as you
rotate the antenna.
ENGLISH
17
Info
TV menu / Installation
Channel installation Autoprogram
Start now
Autoprogram
Installation update
Weak channel installat..
Installation mode
Channel edit
Installation mode
TV menu/Installation
Please select your
installation mode.
Antenna
Cable
Previous Next
Info
TV menu / Installation
Channel installation Installation update
Start now
Autoprogram
Installation update
Weak channel installat..
Installation mode
Channel edit