Philips MCD703-37 - Manual (Page 28)

28
English
System Menu Options
HDCD
The option included in HDCD (High Definition
Compatible Digital) is: “Filter”.
Filter
Sets the audio output cutoff frequency point
when playing an HDCD disc.
➜ Off, 44.1K and 88.2K.
Night Mode
Switches on/off analogue sound dynamic range
compression.
➜ On: Audio with fully compressed dynamic
range.
➜ Off: Audio with uncompressed dynamic
range.
Video Setup Page
The options included in Video Setup page are:
“Component”, “TV Mode” and “Quality”.
Component
Sets the video output according to your video
connection. This setting is not required if you are
using the
VIDEO OUTPUT jack (yellow) to
connect the DVD micro system to your TV.
➜
Ypbpr: Select this if you have connected the
DVD micro system to your TV using Component
video jacks.
➜
S-Video: Select this if you have connected
the DVD micro system to your TV using S-Video
jack.
TV Mode
Selects interlace or P-SCAN video output mode
when
Ypbpr is selected.
➜ P-SCAN and Interlace.
In the progressive scan mode, you can enjoy the
high quality picture with less flickers. It only
works when you have connected the DVD
player's Y Pb Pr jacks to your TV that supports
the progressive video input. Otherwise, a
distorted picture will appear on the TV. For
proper progressive scan set up, see page 17-18.
Quality
This menu helps you to set the video quality.
1
Press 3 4 to highlight “Quality”.
2
Press 2 or OK to enter Video Quality Setup.
The options included in Video Quality Setup
page are: “Sharpness”, “Brightness”, “Contrast”,
“Gamma”, “Hue”, “Saturation” and “Luma
Delay”.
Sharpness
Adjusts the sharpness level.
➜
High, Medium and Low.
Brightness
Adjusts the brightness level. Range: -20-+20.
Contrast
Adjusts the contrast level. Range: -16-+16.
pg001-038_MCD703_37_Eng 2006.2.14, 11:08 28