Philips CAM300WH-37 - Manual (Page 9)

7 EN
3 Get started
Load the Micro SD card
1
Flap open the protective cover on the
Micro SD card socket.
2
Insert a Micro SD card (not supplied) into
the socket.
• Make sure that the the Micro SD card
is not write-protected.
• Make sure that the metal contact of
the card faces down.
3
Close the protective cover securely.
Turn on
• Flip open the swivel touch screen.
» For first-time users, a menu for OSD
language selection is displayed (See
''Get started - First-time setup).
Tip
• To save energy, the camcorder turns off automatically
after being idle for 3 minutes. To turn on the camcorder
again, press .
To turn off the camcorder:
• Press and hold .
• Or close the swivel touch screen.
» The backlight on the swivel touch
screen turns off.
First-time setup
When you turn on the camcorder for the first
time, a menu for OSD language selection is
displayed.
1
On the swivel touch screen, tap / to
select a language.
2
Tap [OK] to confirm.
» A welcome message is displayed briefly.
» An inquiry box for date and time
setting is displayed.
3
Tap [Yes] to confirm.
» A date setting menu is displayed.
4
Tap / to set the day, month and year
successively.
5
Tap [OK] to confirm the date setting.
» A time setting menu is displayed.
6
Tap / to set the hour and minute
successively.
7
Tap [OK] to confirm the time setting.
» The first-time setup is complete.
» The camcorder enters viewfinder
mode.
Tip
• See 'Use your camcorder - Adjust settings' for more
settings.
Select a scene
1
In viewfinder mode, tap to show the
system setting menu.
2
Tap [Scene] to enter scene setting.
3
Tap / to select a scene you like.
4
Tap [OK] to confirm the setting.