Philips CD CLOCK RADIO - Manual (Page 9)

POWER SUPPLY AND DEMO MODE
1. Check if the power voltage, shown on the type plate on the
bottom of the set, corresponds to your local power supply. If
it does not, consult your dealer or service center.
2. Connect the power plug into the wall outlet.The power supply
is now switched on and the display will show the
PHILIPS demo mode.
™ PH..IL ..IPS scrolls across the display continuously.
• Press any control (with the exception of
REPEAT ALARM/ BRIGHTNESS CONTROL on the set)
to exit the demo mode.
3. To disconnect the set from the power completely, remove the
plug from the wall outlet.
SELF-POWERED BACK-UP
The self-powered back-up conveniently allows your day, alarm and
clock time settings to be stored for up to 3 minutes when there is a
power interruption e.g. AC power failure.
The complete CD clock radio and illumination will be switched off.
As soon as the power supply returns, the display will indicate the
correct time.
• If power supply returns after 3 minutes, the display will show
the PHILIPS demo mode and you will need to re-enter the
day and clock time.
BASIC FEATURES
Illumination brightness
1. Check if the SET control is turned to CLOCK position.
2. Press REPEAT ALARM/ BRIGHTNESS CONTROL once or
more
– The brightness of the display will change in this sequence:
LOW ™ MEDIUM ™ BRIGHT ™ LOW...
Volume
Press VOLUME
4or 3 to adjust the volume level. The volume
level vo: is indicated as a number from 0-32.
INSTALLATION
9
AJ 3965/ 17
page
9
English
FM Z Z
Z Z
RADIO CD
PLAY/P AUSE
SET D AY
SLEE P
WEEKE ND- SLEEP ER
ALARM 1
MODE/OFF
SET ALAR M 1 2 TIM E CLOCK
CD/RA DIO OFF
RADIO PRESET
VOLUME
2
1
DIGIT AL RADIO
PLAY/P AUSE
SET D AY
SLEEP
WEEKE ND- SLEEP ER
ALARM 1 MODE/OFF
SET ALAR M 1 2 TIM E CLOCK
CD/RA DIO OFF
RADIO PRESET
VOLUME
2
1
O PEN • C L OSE O PEN • C L OSE
ALARM 1 MODE/OFF
CD/TU N
RADIO ON/B
AND
XP AJ 3965/17 02-02-2000 10:23 Pagina 9