Philips Clock Radio - Manual

AJ100 Clock Radio
QUICK START
MISE EN SERVICE RAPIDE
INICIO RÁPIDO
Thanks for buying Philips AJ100 clock radio.
Our Quick Start guides you through just some of the features on the set.
Please read our instruction booklet to really rise & shine!
ENGLISH
Quick start as easy as ABC!
Step A
• Connect the supplied mains adapter to the
set’s 7.5V DC jack and the plug into a wall
outlet.
Step B
How to set the Clock & Alarm time
1. Check the radio is switched off.
2. Press and hold SET TIME/ SET AL /
SET AL .
3. Press and hold HR+/MIN+.
4. Press SET TIME/ SET AL
/ SET AL .
Step C
Selecting the Alarm mode
Press briefly:
•
ALARM once for radio
or /and
•
ALARM once for buzzer.
Helpful hints:
– If you have selected ALARM
, make sure you
have properly tuned to a station before turning
off the set (See TUNING TO RADIO
STATIONS)
.
3 ways to switch off the alarm
• Either press briefly: ALARM RESET/SLEEP or
REPEAT ALARM/
BRIGHTNESS CONTROL
.
• Press ALARM or ALARM
Radio
1. Press RADIO ON/OFF once to switch on the
radio.
2. Press TUNING +/- one second or more to tune
to your station.
• To store a preset, hold down briefly on a PRESET
button 1-5 until you hear a double beep.
DC 7.5V
A
R
B
C/3
3
AJ100_37-QSG 11/12/06, 17:13 1