Bissell POWEREASE 76R9 - Manual (Page 7)

16
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Hard floor cleaning
(included on select models only)
1. Remove the collection tank (refer to steps 2a and
b in the "To empty the collection tank" section on
page 6)
2. Attach the hard floor tool by hooking it into the
front of the removable nozzle and swinging it
down until the tabs pop into place.
3. Replace the collection tank. Be sure to attach the
two latches.
4. Fill solution tank with BISSELL 2X Hard Floor
Solutions™ to FORMULA fill line. Fill the rest of
the tank with hot (not boiling) tap water to the
WATER fill line. Replace and tighten the black cap.
5. Follow steps 1-8 in "Carpet Cleaning" section on
page 6.
7
2.
O
peration
WARNING:
To reduce the risk of fire and electric
shock- when cleaning a hard floor,
the BISSELL hard floor tool
203-5639 must be used and it must
only be used with BISSELL Hard Floor
Solutions or BISSELL 2X Hard Floor
Solutions cleaning fluid intended for
use with this appliance.