Philips 107T21-74 - Manual (Page 9)

Error Message 1 dialog box here
LightFrame™ cannot detect a monitor which supports this feature. You can still proceed with the software
installation but LightFrame™ might not run on your system.
You may see this message when you try to switch monitors.
Error Message 2 dialog box here
LightFrame™ cannot detect a monitor which supports this feature. You can still start the software but
LightFrame™ may not work.
RETURN TO TOP OF THE PAGE
Technical Specifications*
CRT
• Size and deflection 17 inch / 41 cm ; 90° deflection angle
• Dot pitch 0.25 mm
• Horizontal pitch 0.21 mm
• Tube type
Shadow mask, flat square, high contrast, anti-glare, anti-static,
anti reflection, light transmission 47%
• Phosphor P22
• Recommended display area 12.0" x 9.0" / 306 x 230 mm
• Maximum display area 12.9" x 9.7" / 327 x 245 mm
SCANNING
• Horizontal scanning 30 - 71 KHz
• Vertical scanning 50 - 160 Hz
VIDEO
• Video dot rate 108 MHz
• Input impedance
- Video 75 ohm
- Sync 2.2 kOhm
• Input signal levels 0.7 Vpp
• Sync input signal
Separate sync
Composite sync
• Sync polarities Positive and negative
WHITE COLOR TEMPERATURE
107T Product Information
file:///C|/rita wu/gs3LF/ENGLISH/107T/product/product.htm (5 of 8) [10/12/2000 1:50:19 AM]