Philips BDP7200-37B - Manual

Need help?
User Manual
See the user manual that came with your Philips Blu-ray Disc
Player.
Online
Go to www.philips.com/welcome.
Hotline
Call 1-888-PHILIPS (1-888-744-5477) for our operators.
Troubleshooting
No reaction to the remote control.
Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries correctly.
Insert new batteries in the remote control.
Cannot play back a disc.
Make sure that the product supports the disc.
Make sure that the Blu-ray Disc player supports the region code of the DVD or BD.
(BD: A: DVD: All or 1)
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is finalized.
Clean the disc.
No video signal on the display device.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution using
[OUTPUT] on the front panel.
Press and hold [B (PLAY)] on the front panel for 5 seconds to change the setting back
to its default.
No 5.1-channel audio from the loudspeakers of the audio system.
Does the disc contain 5.1-channel audio? The 5.1-channel audio is not available when
the disc does not contain it.
Does the audio system support 5.1-channel audio? The 5.1-channel audio is not
available when the audio system does not contain it.
In the settings menu, set “HDMI Audio” to “Off”.















BLU-RAY DISC PLAYER BDP7200
Quick Start Guide
1
Connections
Basic Setup
Enjoy
What’s in the box?
Blu-ray Disc Player Remote Control with
Batteries (AA x 2)
RCA Audio / Video Cables Quick Start Guide
2
3
2008 © PHILIPS CONSUMER ELECTRONICS
A Division of Philips Electronics North America Corp
P.O. Box 671539 Marietta, GA 30006 0026
All rights reserved.
Printed in China
E5E10UD
1VMN24456 *****
User Manual
User Manual
Registration Card
AC Cord
E5E10UD_QSG_EN.indd 1 12/26/2007 4:41:18 PM