Philips HTS3566D-37 - Manual (Page 20)

20
English
Finding the correct viewing
channel
A Press 2 to turn on the unit.
B Press DISC on the remote control.
C Turn on the TV and switch it to the
correct video-in channel.
You may go to the lowest channel on
your TV, then press the Channel Down
button on your TV remote control until
you see the Video In channel.
You may press ° button repeatedly
on your TV’s remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..
If you are using a RF modulator, set
the TV to channel 3 or 4.
Refer to your TV user manual on how
to select the correct input on your TV.
Getting Started
Switching to different play
source
On the main unit
Press the SOURCE button on the main
unit repeatedly to select:
DISC
USB FM AUX1 AUX2
DI MP3 LINK DOCK DISC ...
On the remote control
Press DISC to switch to DISC mode.
Press USB to switch to USB mode.
Press RADIO to switch to FM band.
Press DOCK to switch to iPod mode.
Press AUX (MP3 LINK) repeatedly to
hear the audio output from the external
device.
‘AUX1’ for device connected to
AUDIO IN-AUX1 jacks.
‘AUX2’ for device connected to
AUDIO IN-AUX2 jacks.
‘DI’ for device connected to DIGITAL
IN-COAXIAL jack.
‘MP3 LINK’ for device connected to
MP3 LINK jack.
1_hts3565-66D_37_eng2_final813.i20 20 1_hts3565-66D_37_eng2_final813.i20 20 2008-03-27 3:12:01 PM 2008-03-27 3:12:01 PM