Philips 27PT5441-37 - Manual (Page 20)

S
OUND
M
ENU CONTROLS 16
T o adjust your TV sound, select and
use the Sound Menu Controls listed
below:
1 Treble: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to adjust the control. The control
will enhance the high frequency
sounds.
2 Bass: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to adjust the control. The control
will enhance the low frequency
sounds.
3 Balance: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to adjust the level of sound com-
ing from the left and right speak-
ers.
4 AVL: (Auto Volume Leveler)
Press the CURSOR RIGHT 2
or LEFT 1 buttons to turn the
control On or Off. When On, AVL
will level out the sound being
heard when sudden changes in
volume occur during commercial
breaks or channel changes.
5 Incr. Surround: Press the CUR-
SOR RIGHT 2 or LEFT 1 but-
tons to select between Dolby
Virtual or Stereo settings (If
Stereo), or select Spatial or Mono
(If Mono).
6 SAP: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to toggle this control to On or Off.
SAP is short for Secondary Audio
Programming and is sent as a
third audio channel, a SAP signal
can be heard apart from the cur-
rent TV program sound.Note: If
SAP is not present on a selected
show No SAP will appear on the
screen.
7 Sound: Press the CURSOR
RIGHT 2 or LEFT 1 buttons
to select between Stereo or Mono
settings. Note: If Stereo is not
present on a selected show and the
TV is placed in the Stereo mode,
the sound coming from the TV
will remain in the Mono mode.
Main
Picture
Sound
Features
Install
Treble
Bass
Balance
AVL
Incr. Surround
More...
Treble 50
Balance
Bass
R L
AVL On
or Off
Incr. Surround Spatial
or Mono
Incr. Surround Dolby Virtual
or Stereo
Sound Mono
or Stereo
50
SAP On
or Off