Philips HTL2151-F7 - Manual (Page 10)

11
English
EN
Note
• This product may not be compatible with certain types
of USB storage device.
• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
• Digital camera PTP protocols are not supported.
• Do not remove the USB storage device while it is
being read.
• DRM-protected music files (MP3, WMA) are not
supported.
• Support a USB port: 5V , 500mA.
Apply factory settings
You can reset your SoundBar to the default
setting mode.
1
In mute mode, quickly press AUX twice.
» The factory settings is restored.
5 Wall mount
Note
• Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that results
in accident, injury or damage. If you have any query,
contact Philips Consumer Care in your country.
• Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
For information about how to wall mount your
SoundBar, see the quick start guide.
> 25mm
3 - 3.5mm
HTL2151_F7_UM_V2.0.indb 11 2013/5/21 16:16:12