Philips T760-00 - Manual (Page 16)

C
Clean the cutting unit and the inside of the
Trimmer with the brush supplied.
C
Close the cutting unit by pushing it back
into place on the Trimmer until you hear
a click.
Replacing The Cutting Unit
If your cutters become damaged or worn,
do not continue using the Trimmer.
Replace cutters immediately.
Open the cutting unit.
C
Remove the old cutting unit by pulling
it upwards.
C
Place the two notches of the new cutting
unit into the guiding slots.
Push the cutting unit back onto the
Trimmer until you hear a click.
This Trimmer has no otherr user-serviceable
parts. Any other service should be performed
by an Authorized Norelco Service Location.
4
3
2
1
5
4
12 ENGLISH