Philips 19B4LPCB-27 - Manual (Page 10)

8
2. Setting up the monitor
2.3 Remove base stand and base
Remove the base stand
Before you start disassembling the monitor base,
please follow the instructions below to avoid
damage or injury.
1. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen.
2. Detach the base stand away from the base
column by:
(1) Use your fingers to loosen the screw
located at the bottom of the base.
(2) Gently move up-and-down to release the
latch that locks the base and pull the base
away from the base column.
Remove the base
Condition:
• For VESA standard mounting applications
1. Extend the monitor base to its maximum
height.
2. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen. Then lift the monitor
stand.
3. While keeping the release button pressed, tilt
the base and slide it out.