3 remove the base assembly for vesa mounting, 3 remove the base assembly for vesa, Mounting – Philips 19S4LSB5-27 User Manual

Page 10

2. Setting up the monitor

2.3 Remove the Base Assembly for

VESA Mounting

Before you start disassembling the monitor base,

please follow the instructions below to avoid

any possible damage or injury.
1. Place the monitor face down on a smooth

surface. Pay attention not to scratch or

damage the screen.

2. Use a flathead screwdriver to remove four

mylars from the hinge cover.

3. Remove the screws from hinge cover.

4. Remove the base assembly.

Note

This monitor accepts a 100mm x 100mm

mounting interface.

AUDIO IN

100mm