Philips MCD759D-37B - Manual (Page 3)

Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK/RDS on the remote.
When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the
remote to set the hours.
Press CLOCK/RDS again and the minute digits flash. Then turn VOLUME-/+ on the
system or press VOL +/- on the remote to set the minutes.
Press CLOCK/RDS again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive
signals or the cables are not connected accordingly, see the user manual for proper progressive
scan setup or deactivate the progressive scan feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit
progressive scan.
Tip
See chapters "Preparations" and "DVD Menu Options" in the User Manual for detailed descriptions.
CLOSED CAPTIONS
1
2
3
Press OPEN •CLOSE з ( з on the remote) to open the disc tray and load in a disc,
then press the same button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
Playback will start automatically. If not press ÉÅ .
To stop playback, press PRESET-/
9
(
9
on the remote).
Playing a disc
OPEN•CLOSE
MCD759D QSG_37-Eng 2007.6.22, 9:25 3