Philips DVP3345V-17B - Manual (Page 2)

1 Connections Basic Setup 2
Finding the Viewing Channel
1 Press to turn on the DVD/VCR.
2 Turn on your TV.
If connected to your VCR, make sure it is
switched off or in standby mode before
proceeding.
3 Press “2” on the TV’s remote control, then press
channel down button repeatedly until you see the
Language Select Menu. This is the correct viewing
channel (Video In channel) for the recorder.
B ENGLISH [ON]
FRANCAIS
ESPAÑOL
PUSH B
LANGUAGE SELECT
* Refer to your TV’s user manual for
details.
Initial Settings
A LANGUAGE - VCR
1 Press . VCR light will appear on the front
of the DVD/VCR. The display shown below
will appear.
B ENGLISH [ON]
FRANCAIS
ESPAÑOL
PUSH B
LANGUAGE SELECT
2 Press K or L to select ENGLISH, FRANCAIS
(French) or ESPAÑOL (Spanish) as the language
for VCR On-Screen Displays and menus. Then,
press B.
B CLOCK
1 Press VCR VCR , then press SETUP SETUP so
CLOCK SET Menu appear.
2 While the MONTH space is flashing, press K or
L until the month appears. Then, press B.
MONTH DAY YEAR
0 3 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
CLOCK SET
3 Likewise, set the DAY, YEAR, HOUR and
MINUTE. Then press B.
4 While the AM or PM space is flashing, press K or
L to point to AM or PM.
5 Press CLEAR or B to start the clock.
C LANGUAGE - DVD
1 Press DVD DVD to put the DVD/VCR in DVD
mode.
2 While playback is stopped, press SETUP SETUP .
3 Press s or B to select CUSTOM at the top of
the menu, then press OK OK .
4 With (LANGUAGE) selected, press OK OK .
AUDIO
SUBTITLE
DISC MENU
OSD LANGUAGE ORIGINAL
OFF
ENGLISH
ENGLISH
OK
LANGUAGE
5 Press K or L to select OSD LANGUAGE.
Press OK OK .
6 Press K or L to select a language, then press
OK OK .
If you select OTHER for AUDIO, SUBTITLE, or
DISC MENU, press four Number buttons to
enter the code for the language you desire. Use
one of the Language Codes listed on page 49 in
the User Manual.
Connection to an External Tuner
A Before Connecting
Disconnect the power cords of the devices from the AC outlet.
B Connecting
Make the connection as illustrated below.
This DVD/VCR does not have a tuner
input jack. To record TV programs on
your DVD/VCR, you need to connect
this DVD/VCR to an external tuner
device (e.g., set top box, cable box or
satellite receiver) that has audio/video
output jacks.
DIGITAL AUDIO OUT
COAXIAL
AUDIO OUT
DVD
L
R
L
R
L
R
S-VIDEO OUT COMPONENT VIDEO OUT Y
CB /
PB
AUDIO OUT DVD/VCR VCR
VIDEO OUT
AUDIO IN
VIDEO IN CR /
PR
AUDIO IN
VIDEO IN
L
R
OUT IN
ANT. IN
AUDIO OUT L R VIDEO OUT
Audio Cable
(not supplied)
RF coaxial cable
(not supplied)
RF coaxial cable
(not supplied)
External tuner
TV Signal
Audio Cable (supplied)
Video Cable
(not supplied)
Video Cable (supplied)
DVD/VCR
Back of TV
1 2
3
4
5
6
1 Connect a TV signal to the IN jack on the external tuner.
2 Use an RF coaxial cable (not supplied) to connect the OUT jack on the external tuner to the ANT. IN jack on the TV.
3 Connect the red and white audio cable (supplied) to the red and white AUDIO OUT jacks on the external tuner and to
the red and white VCR AUDIO IN jacks on the DVD/VCR.
4 Connect the yellow video cable (supplied) to the yellow VIDEO OUT jack on the external tuner and to the VCR VIDEO
IN jack on the DVD/VCR.
5 Connect another red and white audio cable (not supplied) to the red and white DVD/VCR AUDIO OUT jacks on the
DVD/VCR and to the red and white AUDIO IN jacks on the TV.
6 Connect another yellow video cable (not supplied) to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to the
VIDEO IN jack on the TV. If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a
commercially available stereo audio/video RF modulator. Refer to the manual accompanying the modulator for more
information.
7 Connect the power cords of the TV and the DVD/VCR to a power outlet. Turn on the TV and set it to the correct Video
In channel.
For additional connection diagrams, see the accompanying User Manual.
OK
SETUP
VCR
CLEAR
DVD
E8E20UD_QSG_EN.indd 2 E8E20UD_QSG_EN.indd 2 8/22/2007 4:19:31 PM 8/22/2007 4:19:31 PM