Philips MX3950D-98 - Manual (Page 39)

39
English
3139 115 21993
Switching on/off
Switching to active mode
●
Adjust the SOURCE control to select :
DISC 1....DISC 5 ™ FM TUNER ™
AM TUNER ™ TV/AV ™ AUX ™ DIG IN ™
DISC 1....
OR
Press DISC/MEDIA, TUNER, TV/AV or
AUX/DI on the remote.
Switching to Eco Power standby mode
● Press STANDBY ON (B).
➜
ECO POWER button lights up.
➜ The display screen will go blank.
Switching to standby mode (view
clock)
●
Press and hold STANDBY ON (B).
➜ The clock appears.
➜
While in standby mode, pressing
CLOCK•TIMER button will switch the system to
Eco Power standby mode.
Dimming system’s display screen
●
Press DIM to select desired brightness :
MODE 1, MODE 2, MODE 3 or NORMAL.
Note:
– Pressing DIM button in standby mode will toggle
between half and full brightness.
Recording to an external device
1
Connect the external recording device to
LINE OUT or DIGITAL OUT.
(See page 15 “Connections-optional“.)
2
Select the source to record from your DVD
system (DISC, TUNER, TV/AV or AUX/DI) and
start playback (if necessary.)
➜
You can only record from DISC if using
DIGITAL OUT to connect the external
recording device.
3
Start recording on the external recording
device.
Notes:
– All the sound control features are available for
selection.
– Refer to the owner’s manual of the connected
equipment for details.
Using the remote to operate
your television
4
2
TV/AV DISC/ MEDIA TUNER AUX/DI
REPEAT REPEAT DISC SKIP
DISC MENU
PROGRAM
SYSTEM MENU
DIM SLEEP SUBW TV VOL
VOICE MUTE
SEATING ZOOM
PREV NEXT
STOP PLAY/PAUSE
A-B
VOL
OK
SOUND SURR.
4 5 6
1 2 3
7 8 9
0
1
3
1
Press TV/AV.
2
Press
S / T or use the numeric
keypad (0-9) to select the TV’s channel.
3
Press TV VOL +/- to adjust the TV’s volume
level.
4
Press B to turn off your TV.
Other Functions
pg 001-044_MX39-37-Eng1 2/25/03, 9:59 AM 39