Philips HD8773-47 - Manual (Page 54)

52 ENGLISH
6 Thoroughly wash the brew group with lukewarm water and carefully
clean the upper fi lter.
Caution:
Do not use detergent or soap to clean the brew group.
7 Let the brew group air-dry thoroughly.
8 Thoroughly clean the inside of the machine using a soft, dampened
cloth.
9 Make sure the brew group is in the off position; the two reference signs
must match. If they do no match up, proceed as described in steps 10-
11.
10 Gently pull down the lever until it is in contact with the brew group
base and the two reference signs on the side of the brew group match.
11 Make sure the hook to lock the brew group is in the correct position by
fi rmly pressing the “PUSH” button until it locks into place. Check if the
hook is at the top end position. If it is not, please try again.