Bogen WV150 - Manual (Page 6)

Installation
Package Contents
• Amplifier • 2 Cables
• Instruction Manual • Combined XLR receptacle and phone jack
• 2 Screws (M 3 x 8) • 6 Screws (M 4 x 8)
Mounting
A surface-mount (model BBS) or flush-mount (model BBF shown below) back box as well as a WMAD door
is required for installation. Refer to the instructions provided with these items for proper installation.
(See Components on Back Cover.)
Front Panel Input Connector
If desired, a front panel mounted combination female XLR and 1/4" stereo
phone jack can be installed. A white screened area is provided on the front
of the amplifier, below the connector, to identify the connector’s purpose
and associated input number. Remove the filler cap in the upper left-hand
corner of the front panel and install the combination jack as shown in the
figures below. Either or both of the connector styles on the jack can be
wired to any user-supplied module with included cables. The labeling below
the two cable connectors on the PCB identifies corresponding connectors
on the combo jack.
4
XLR
WHT BLK RED
WHT BLK RED
T G R
+ G
PHO NE
Connection Identifiers
WARNING:
To prevent injury, this apparatus
must be securely attached to
the wall in accordance with the
installation instructions.