Philips 221S3UCB-00 - Manual (Page 13)

11
3. USB monitor operation
2. Setting the Display
Follow this procedure to set the display.
To set the display
2.1. Open Screen Resolution.
2.2. Set the display options. Refer to the table below for details on each option.
Menu Option Sub-menu Option Description
Display Use the drop down list to select a display to be configured.
Resolution Use the drop down list and user the slider to choose a
resolution.
Orientation (Use
this function if
you upgrade with
Ergonomics base) Landscape Sets the display to landscape view
Portrait Sets the display to portrait mode
Landscape (flipped) Sets the display to upside down landscape mode
Portrait (flipped) Sets the display to upside down portrait mode
Multiple displays Duplicates these
displays
Reproduces the main display on the second display.
Extend these displays Extends the main display onto the secondary display.
Show Desktop only
on 1
The desktop appears on the display marked 1. The display
marked 2 becomes blank.
Shows Desktop only
on 2 The desktop appears on the display marked 2. The display
marked 1 becomes blank.
Table 1: WDP Options
To control the behaviour of an attached DisplayLink display, it is also possible to use Windows key+P to
display the menu (and cycle through it) to switch mode.
3. To control the Display
3.1. Select the Windows key+P. The following menu appears.
3.2. Click on one of the options. The display updates to reflect your choice.
The DisplayLink icon application
You can configure the behaviour of the DisplayLink USB Graphics through the DisplayLink icon
application on the taskbar, where present.