beautypg.com

Philips 1160X-42 User Manual

Page 9

background image

16

17

ENGLISH

Charging

Charging, recharging or storing at

temperatures below 40ºF or higher than 95ºF

adversely affects lifetime of batteries.

Always unplug this charging stand/Jet Clean

System from the electrical outlet immediately

after use, except when razor is (re)charging.

You can store the razor in the charging stand

or Jet Clean System (1160XCC only).

Charging or recharging requires one full hour.

A fully charged razor has a shaving time of

up to 50 minutes (models 1180X, 1160X and

1160XCC) or 40 minutes (model 1150X).

You may recharge when the bottom charging

light blinks orange (model 1180X) or the plug

symbol blinks (models 1160X, 1160XCC and

1150X).

Do not charge razor in a pouch.

Charging in the Charging Stand

C

1

Connect the small plug of cord to charging

stand. Connect the power plug into any

100V to 240V AC outlet. Use only the

power cord provided.

An adaptor plug may be necessary for power

cord usage in some foreign countries. Use

an attachment plug adaptor of the proper

configuration for the power outlet.

The power cord will automatically convert to

work on 100V to 240V AC systems.

ENGLISH

C

2

Place razor in stand in an upright position

(

1). Press the razor tightly into the holder

making sure the charging contacts on each

side of the razor fit into the holder (2).

3

The display on the razor will indicate razor

is charging.

4

Charging requires one full hour. A fully

charged razor has a cordless shaving

time of up to 50 minutes (models 1180X,

1160X and 1160XCC) or 40 minutes

(model 1150X).

Charging Razor with Jet Clean

System (1160XCC)

1

Connect the small plug to the Jet Clean

System. Connect the charging plug into

any 100V to 240V AC outlet. Use only the

charging plug provided.

The razor holder automatically moves up to the

highest position.

C

2

Remove protective razor head cap from

razor.

NOTE: The razor cannot be placed in the Jet

Clean System when the trimmer or protective

razor head cap is placed on the razor.

C

3

Place the razor head side down in the

razor holder with the display facing the

front of the Jet Clean System.

1

2

This manual is related to the following products: